Hardware configuration	CPU: i MX6;Memory:1GB
Display card	Support a resolution of 1080p
Hard disk space	8GB
Security software	No
Network conditions	Network port
Network operation environment	LAN
Printing system	Built-in thermal printer
Data processing	Support LIS connection to transmit test results and import data
Excitation light source	LED
Sample type	Whole blood, serum, plasma and urine
Sample management	Automatically identify test items. Test results are output and transmitted in time
Power parameters	Host input——24V,9.2A;Adapter input——AC 220V,50Hz
Input power	220V
Number of tests	Channel 20 (supports multiple simultaneous tests and independent timing)

Simple operation instructions

1. Click "Scan QR code", point the QR code to the QR code scanner (about 10cm), read the project information, and the interface prompts "Information input is complete", and click "End input".

Note:
(1) for different items, the two-dimensional code card cannot be cross-scanned.
(2) For the same item and different batches, the two-dimensional code cannot be cross scanned.

2. Enter the test information, select the sample type, and then click OK.

Ex-factory mode: refers to the reagent card of the actually measured sample incubated outside after adding the sample, and the reagent card is put into the instrument for sample result analysis.

3. Add sample: absorb the sample, add buffer solution, and stir evenly.
Use the sample gun to add the absorbed sample to the reagent card.

4. Test: put the reagent card into the reagent bayonet of the instrument, and the instrument will automatically identify the test items and carry out countdown test.

Matters needing attention:
(1) Please ensure that the reagent card is in place.
(2) When the cab door is closed, do not add samples or tests.
(3) When the channel countdown on the instrument interface is less than 20 seconds, do not add samples or tests.
(4) Don't try to stop the door from closing.
(5) Clear the reagent cards in the trash can in time to prevent the instrument from losing the reagent cards normally.

Product features:

Larger capacitive touch screen	10.1 "full touch screen control sensitive operation
Enrich peripheral interface	HIS/LIS and external printer
Automatic project identification	The reagent test items can be obtained automatically
Intelligent Android system	Better user experience
Test results will be printed automatically	The printed results of the built-in thermal printer will be printed automatically
Centralized card processing	The original waste card processing warehouse is clean and convenient
Scan code for automatic input	Two-dimensional code input of standard calibration information is convenient and quick

Many	Up to 20 test channels allow batch testing to continuously test all channels to support emergency measurement
Fast	In external mode, the detection results can be obtained after 5 seconds, and the fastest latency time in the machine is 3 minutes
Quasi	Greatly improved the detection accuracy of the 24-bit signal acquisition chip of the patent optical detection system
Stable	Built-in super-stable incubation detection system completely solves the result deviation caused by temperature difference